Varizoom VZSTEALTHPZFI Bedienungsanleitung PDF herunterladen

VZ-STEALTH-PZFI

INSTRUCTIONS

Thanks for buying our new ZOOM/FOCUS/IRIS control for Panasonic camcorders. We think

you will enjoy this product, but before using it please read the instructions thoroughly.

WARNING: THIS IS NOT A “LANC” CONTROL DEVICE. DO NOT PLUG THE VZ-STEALTH-PZFI INTO ANY

CAMCORDER OTHER THAN APPROVED PANASONIC UNITS. THIS REMOTE CONTROL SHOULD ONLY

BE PLUGGED INTO THE SPECIFIED ‘CAM REMOTE’ JACKS ON THE CAMCORDER BODY.

1. First, loosen the brass clamp nuts and fix

the controller to your tripod handle, jib, or

shoulder support.

2. The split Y-cable has two connectors, one

for the zoom/record/pause circuit and

another for the focus/iris circuit. The

zoom/record/pause connector is the

smaller plug that fits into the ‘ZOOM S/S’

jack. The focus/iris connector is the

larger plug that fits into the ‘FOCUS/IRIS’

jack.

3. ZOOM CONTROL - To zoom in (telephoto) press the lever up (away from you), and to

zoom out (wide) pull the zoom lever down (towards you). The farther you press the lever,

the faster the lens will zoom. The zoom characteristics of the ROCK-PZFI are determined

by the camera (e.g., the slowest zoom speed attainable with the DVX100B takes 30

seconds from end-to-end).

4. RECORD/PAUSE CONTROL - Start and stop recording by pressing the “R” button.

5. FOCUS CONTROL - To operate the remote focus control feature properly, the ‘FOCUS’

switch on the side of the camera lens should be set to ‘A’. To switch between autofocus

and manual focus using your ROCK-PZFI, simply slide the switch marked ‘Focus’

between ‘A’ (auto) and ‘M’ (manual). While the switch is set to ‘M’, you can adjust the

focus precisely using the knurled dial on the left side of the control.

-This dial has been designed so that you may either roll it using your operating thumb

or adjust it separately with your free hand.

-Note that your camera has addressable focus points indicated in the viewfinder by

“MF00 – MF99” (when in autofocus mode, it will read “AF00 – AF99”). This means

you can precisely rehearse or repeat focal adjustments without any guessing.

-Special note - While it is certainly possible to switch into autofocus mode for instant

quick-focus grabs using the controller, it is important to remember that when you

switch back to manual mode the camera will return to the focal point dictated by the

position of the dial on the controller. In other words, if your manual focus were set far

out to MF87 and you wanted to grab focus on a nearby moving object, you could do so

by switching into ‘A’ on the controller and letting the camera do the focusing, but when

you switch back to ‘M’ on the controller the camera will instantly return to MF87 (the

position in which the dial was left). ‘Push Auto’ is not available through the remote

1 2

VZ-STEALTH-PZFI 1
INSTRUCTIONS 1

Inhaltsverzeichnis

Seite 1 - INSTRUCTIONS

VZ-STEALTH-PZFI INSTRUCTIONS Thanks for buying our new ZOOM/FOCUS/IRIS control for Panasonic camcorders. We think you will enjoy this product, but b

Seite 2

interface. These are limitations of the camera’s remote circuit design, and should be kept in mind if you intend to switch between auto and manual fo

Kommentare zu diesen Handbüchern

Keine Kommentare

Varizoom VZSTEALTHPZFI Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Optik Varizoom VZSTEALTHPZFI herunter. VariZoom VZSTEALTHPZFI User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Optik Varizoom VZSTEALTHPZFI